1970s Grain Auger Feed Truck Bed
Features
All Aluminum Construction
Extremely durable and light weight aluminum construction. The only Trailer available with 100% Extruded Base. Extruded Base allows engineering to incorporate strength where strength is needed. This is something formed bases can not give you.
Extruded Components
One piece extruded components offer added strength as well as added piece of mind! Allowing for "Frame Flex" without compromising rigidity of the unit.
Aluminum Walkway
Aluminum Expanded Metal walkways offer easy access to entire top side of the trailer.
Hydraulic Controls
Walinga trailers feature V-20 hydraulic controls that are easily accessible as well as easy to understand and operate, using hydraulic fittings that promote good fluid flow efficiencies.
Heavy Duty Bearings
At Walinga we make sure our trailers are built to last. That's why we've taken the time to make sure even the little things are going to work well day in and day out.
Gear-Driven Boom Rotation
Accessible Bulk Head Fittings
Heavy Duty Stainless Steel Hydraulic Lines
Heavy duty hydraulic tubing ensures the hydraulic system performs 100% and lasts the lifetime of the trailer.
D.O.T. Lighting
D.O.T. lighting ensures everyone around you can see you in all conditions.
Spring Mounted Motors
Spring Mounted motors were developed to provide longer life of the key components. Coupled with our Unique Spline Inserts motors and bearings last longer and are easier to change out. A Walinga Exclusive!
Pump & PTO
Specialty Parts are a 'Snap...'
..with Walinga's fully-integrated CAD production line. All of Walinga manufactured parts, including customized components, are stress tested in the design phase and manufactured to ISO 9001:2015 standards. Years of experience combined with full CAD integration ensures parts assemble and perform exactly as intended. If you don't see the component you require, our engineers can make it.
Options - HOAG
For many years the Walinga line of all Bulk Feed Delivery Units have been the equipment of choice. These units allow the operator maximum load capabilities, minimum weight to strength ratio, and of course our guarantee of low maintenance requirements.
12-15-12 inch Auger Discharge
Unload capacities up to 7,000 lbs / min. 12" floor auger, 15" vertical auger, 12" boom auger.
LowPro
Aerodynamic
Saves on Fuel
Includes Anti-Rollover
All Aluminum
Smart Bin
Horizontal Slide Gates
Horizontal slide gates are great for "sticky" feed. Horizontal slide gates prevent product from bridging at the bottom.
Remote Controlled Boom
Control the boom from comfort of the cab during inclement weather or from anywhere outside the cab!
Tractor Hydraulic Package
Heavy Duty tractor wet kits are designed to keep your Walinga trailer running strong using only the best components.
Roll Tarp Fender
Galvanized Chassis
Feedlok Control Systems
Right Feed.. Right Bin.... Every time.... FEEDLOK's highly accurate GPS location system ensures the right feed is delivered to the right bin. Download the Feedlok brochure here.
Roll Stability Controller
This controller, known as SmartTrac by MeritorWabco, monitors the vehicle's rollover threshold and activates to slow the vehicle when the threshold is exceeded. After the conditions cease, normal vehicle operation resumes.
Aluminum Tool Box
Great for transporting feed bags, grain shoots, brooms etc.
Front Unload
Custom LED Lighting Kits
The possibilities are pretty much limitless.
MonoBlock Hydraulic Controls
Aluminum Catwalks
Aluminum catwalks and ladders offer the driver safe and easy access to the top side of the unit.
Hydraulic System Super Cooler
Heavy Duty Hanger Bearings
Heavy duty hanger bearings ensure that unloading runs smoothly load after load.
Air Operated Gates
Boom Out of Saddle Light
Air Operated Handrails
In-Cab HMI Smart Controller
Smooth Polished Trailer
Stainless Hydraulic Lines
Discharge Systems
Walinga Inc offers a number of different options when it comes to unloading feed and grain. We offer auger unloading, air unloading, paddle chains and drag chains. Which ever suits your needs!
Air Discharge
The Walinga Pneumatic discharge system utilizes the Walinga designed and developed Super Duty Positive Displacement Blower, as well as the Walinga designed and developed Cast Iron Airlock.
Auger Discharge
The Walinga design employs a 9in. (23cm) diameter trough auger with helicoid flighting on a 2 1/2 in (63mm) diameter shaft. Direct drive by a heavy duty, spring mounted high torque hydraulic motor incorporates automatic surge overload protection that controls the speed of the discharge augers. The design includes a heavy duty thrust bearing on the drive end and hanger bearing at the discharge end. A plastic (UHMW) liner in the auger trough is supplied to provide a tighter fit between auger and trough as well as prolonged life of trough.
Paddle Discharge
Both systems incorporate the Walinga direct drive, heavy duty, spring mounted, high-torque hydraulic motor design. This system allows for better speed control of the discharge system and longer component life. Wear liners are also incorporated into the trough and paddle boom to provide you with better clean-out and longer wear life.
Blower Package
The Walinga Blower is a precision machined, Positive Displacement design blower. Hard coated internal surfaces provide for greater wear resistance in transfer applications. The Walinga blower is available in two prime sizes: Model 510-1100 cfm capacity and; Model 614-1800 cfm capacity.
Transition Head
Double Chain flat paddle with horizontal sliding gates, which is ideal for typical Dairy "Sticky" feeds or in a 1/2 moon style Single chain paddle with Inverted "V" style gates, which is ideal for pelleted feeds and especially designed for "range cubes" or "cow cakes."
Rotary Vein Airlocks
The Walinga Airlock is a precision-machined cast iron housing hydraulically driven airlock. The Walinga manufactured airlocks have been designed to provide maximum performance, with minimal product damage.
The fabricated steel rotor is available in 8 or 10 vane configurations with stainless steel, carbon steel knife edge or composite rubber adjustable tips. The injets and outlet are designed to allow for a freer flow of material providing for maximum capacity and minimal product damage.
Boom Rotation
The rotation of the Boom is by means of RC80 primary reduction and RD50 secondary reduction drives. Rated strength is 14,000 lbs. (6343 kg). Hydraulic over load protection is provided through a cross over relief valve.
Inverted "V" Gates
Inverted "V" gates allow each compartment to be individually discharged of its load through selective operation of the gates. Manual type rack & pinion are standard. Air operated gates are offered as an option. With the inverted "V" gates, the gates can be closed "against the load."
Transfer Systems
The Walinga Ultra-Vac provides the operator with the flexibility to draw on left-over feed, clean-up spills or move product around the mill with a unit that is easy to run and easily brought to the farm. The Ultra-Vac can be located on either the tractor or on the trailer and is also available in a completely self contained model. The Ultra-Vac features patented pre-cleaner dust separator, Walinga model 510 Chrome blower, hydraulic powered airlock with adjustable tips and stainless steel suction hoses.
3510-G Under Mount
Blower: #510
Airlock: #1210
Capacity*: 700 bu/hr, 18 tonnes/hr
Motor Power: 25 hp gas
Line Size: 4 in (100mm)
** Capacities based on using a 12Ft (3.65m) suction line moving corn or barley. Capacity will vary with condition of product. Due to continuous product development specifications subject to change without notice.
4510 Rear Mount
Blower: #510
Airlock: #1314
Capacity*: 1000 bu/hr, 27 tonnes/hr
Motor Power: PTO
Line Size: 4 in (100mm)
** Capacities based on using a 12Ft (3.65m) suction line moving corn or barley. Capacity will vary with condition of product. Due to continuous product development specifications subject to change without notice.
5510-T Tractor Mount
Blower: #510
Airlock: #1314
Capacity*: 2300 bu/hr, 59 tonnes/hr
Motor Power: PTO
Line Size: 5 in (125mm)
** Capacities based on using a 12Ft (3.65m) suction line moving corn or barley. Capacity will vary with condition of product. Due to continuous product development specifications subject to change without notice.
Source: https://walinga.com/bulk-feed-bodies
0 Response to "1970s Grain Auger Feed Truck Bed"
Post a Comment